hamos EKS

Single-variety plastics with electrostatic Separators

With hamos EKS electrostatic separators, you can separate plastic mixtures into their components in a dry process. hamos EKS separators can also be used to separate unwanted plastic impurities.

By utilising the tribo-electric behaviour of the individual plastics, the hamos EKS separates your mixed materials into unmixed fractions with little effort. This allows you to recover valuable raw materials for new, high-quality products from mixed plastic waste.

Category HAMOS

To achieve an optimum separation result, the plastic mixtures to be separated must be as follows:

Mixture of non-conductors
Completely digested material (no material composites)
Different tribo-electric charging behaviour
Dry material (ideal surface moisture content less than 0.4 %)
Dedusted material
Particle size between 2 and 12 mm
Ideally a two-component mixture

Not sure whether your material is suitable for electrostatic separation? Talk to our experts. After consultation, you are welcome to send us a material sample of approx. 20 kg, which we can use to test the separability of your material in our technical centre.

We will show you the purities and throughputs we can achieve with your material. You will receive our test report based on these separation results. We will then be happy to offer you the optimum device or system for your application.

You will be amazed at the added value you can achieve with your material once it has been separated into clean fractions!

정전기와 이물제거를 동시에

hamos EKS

To achieve an optimum separation result, the plastic mixtures to be separated must be as follows: